splitboard parts
-
10,00 €OVERVIEW & FEATURES The small piece of plastic that made a huge difference in splitboard binding technology. This piece attaches beneath your binding’s toe ramp and helps lock you in place in both ride and tour mode. Purchasing as a backup? Consider a full Backcountry Kit to keep your pow day from…
-
50,00 €Things happen in the backcountry…be prepared. This kit includes everything you need to keep a pow day from being cut short. Weight: 5.64oz/ea (188g) SURVIVAL GUIDE IN THE KIT 2x M6x16mm M’s Heel Loop Screws 1x M6x12mm W’s Heel Loop Screw 2x M6x10mm Touring Bracket Screws 1x M6x8mm Heel Rest Screw 1x…
-
30,00 €Tesla and T1 bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. Includes: 1x Tesla/T1 Touring Bracket Tesla/T1 Bracket is compatible with all Spark R&D Tesla, Tesla T1, Burton Hitchhiker bindings. The bracket is not compatible with Spark R&D Pin Mount bindings.
-
50,00 €Your binding attaches to the Slider Track using binding screws and T-nuts. The Slider Track is utilized in ride and tour mode and is attached to the splitboard with the stainless steel Slider Pin. Sold as a pair.
-
15,00 €The Voilé Cam Bushing was designed as a simple, easy to use mechanism to remove any loose play in your splitboard hooks. Whether it’s your old DIY or your favorite factory split, the Cam Bushing allows for 2mm of adjustment, eliminating the need to re-drill or replace your aging hardware.
-
20,00 €A set of 8 T-nuts (6mm) for mounting your snowboard binding to the Slider Track. The 6mm diameter is industry standard for snowboard binding screws. They will work with your normal snowboard binding screws. Always be aware of the screw length. If the screw is too long it will prevent…
-
50,00 €
Stainless steel bracket where the Slider Track attaches during the tour mode. Attached with stainless steel Slider Pin. Touring Bracket includes the plastic pin guide and all screws necessary to mount.
-
Out of Stock
15,00 €
8 – 6mm diameter x 12mm length screws for mounting the Universal Pucks to factory built splitboards. Also can be used for mounting your snowboard binding to the Slider Track. In most cases when mounting your snowboard binding to the Slider Track you will use the screws that came with…
