There are 31 products.

Voile Splitboard Dual Height Climbing Heels
Voile Splitboard Dual Height Climbing Heels
Voile Voile Splitboard Dual Height Climbing Heels
Αναβαθμίστε το splitboard σας με το νέο σύστημα της Voile για διπλή ρύθμιση στο ύψος αναρρίχησης. Το πίσω “τακούνι” για αναρρίχηση είναι το κανονικό ύψος στα 55 χιλιοστά και το μπροστινό “τακούνι” είναι στα 75 χιλιοστά. Περιλαμβάνει ένα ζευγάρι (Dual Height Climbing Heels) διπλής ρύθμισης αναρριχητικά “τακούνια” / καλώδια και βίδες για την τοποθέτηση, σε εργοστασιακής κατασκευής splitboards.
50,00 €
Online only!
Add to cart
Voile Slider Track
Voile Voile Slider Track
  Your binding attaches to the Slider Track using binding screws and T-nuts. The Slider Track is utilized in ride and tour mode and is attached to the splitboard with the stainless steel Slider Pin. Sold as a pair.  
30,00 €
Online only!
Add to cart
Voile T-nuts for Slider Track
Voile Voile T-nuts for Slider Track
A set of 8 T-nuts (6mm) for mounting your snowboard binding to the Slider Track. The 6mm diameter is industry standard for snowboard binding screws. They will work with your normal snowboard binding screws. Always be aware of the screw length. If the screw is too long it will prevent the Slider Track from sliding onto the Universal Puck system.
5,00 €
Add to cart
Voile Binding Screws for Slider Track - Flat Head
Voile Voile Binding Screws for Slider Track - Flat Head
6mm diameter x 12mm length, flat head screws. These are spare parts and in most cases when mounting your binding to the Slider Track you will use the binding screws included with your binding. When mounting bindings to the Slider Track always be aware of the screw length. If the screw is too long it will prevent the Track from sliding over the Universal Puck system.
5,00 €
Online only!
Add to cart
Voile Slider Pin
Voile Slider Pin
Voile Voile Slider Pin
The Slider Pin secures the Slider Track to the splitboard in tour and ride modes. The stainless steel cable lanyard is attached to your binding to prevent the pin from being lost in the backcountry. It is advisable to carry a spare.
18,00 €
Online only!
Add to cart
Voile Lanyards for Slider Pins
Voile Voile Lanyards for Slider Pins
These are the replacement lanyards for the slider pins, works with all Voile slider pin models. Sold as a pair.
Voile Touring Bracket
Voile Voile Touring Bracket
Stainless steel bracket where the Slider Track attaches during the tour mode. Attached with stainless steel Slider Pin. Touring Bracket includes the plastic pin guide and all screws necessary to mount.
50,00 €
Online only!
Add to cart
Voile Touring Bracket - DIY
Voile Voile Touring Bracket - DIY
Stainless steel bracket where the Slider Track attaches during the tour mode. Attached with stainless steel Slider Pin. Touring Bracket includes the plastic pin guide and all screws necessary to mount. This parts kit includes T-nuts for Split-your-own-board.
35,00 €
Online only!
Add to cart
Voile Screws for Touring Bracket
Voile Voile Screws for Touring Bracket
6 - 6mm diameter x 10mm length screws for mounting the Touring Bracket to factory built splitboards.
5,00 €
Online only!
Add to cart
Voile Screws for Dual Climbing Heels
Voile Screws for Dual Climbing Heels
4 - 6mm diameter x 16mm length screws for mounting the Dual Height Climbing Heels to factory built splitboards.
5,00 €
Online only!
Add to cart
Voile Split Hooks
Voile Split Hooks
Set of 4 Hooks. Includes all screws, bushings and nuts to mount to your splitboard. This parts kit is not for the split-your-own-boards, but for factory build splitboards. The difference is in the type of screw that is used to attach the hook to the board half.
35,00 €
Add to cart
Voile Hook Screw Pack
Voile Voile Hook Screw Pack
This is the replacement screw pack for the split hooks. This screw pack is for factory built splitboards.
0,00 €
Online only!
Add to cart

Ετικέτες

snow shovel

Κατασκευαστές